212
Teak oil sealer
HULL AND SUPERSTRUCTURE
212 Is our teak maintenance 3rd Step: Teak protection.
212 Saturates and nurishes the wood and also gives it a hydrophobic treatment (waterproofing).
The teak will permanently be protected from the elements and, cleaning, especially after the rainy season, will be facilitated.
212 Also has the advantage of maintaining the natural aspect of the wood, allowing it to dry quickly, leaving a grease-free surface.
Contains n-butyl acetate, Hydrocarbons, C9-C11, n-alkanes, isoalkanes, Cyclics, <2% aromatics, 1-methoxy-2-propanol, monopropylene glycol methyl ether
N.A
Clear liquid / solvent
Teak and exotic woods.
Directions for use:
- 212 is used pure on a clean and dry surface: new teak, sanded or cleaned.
- Stir the oil before the application. Apply with a soft brush. Leave it to dry for at least 6 hours. It is recommended to apply at least two coats for the first treatment.
- The following maintenance intervals result in an application approximately every 10 weeks (depending on the ambient pollution, the use and exposure of the bridge).
- Between two applications, the bridge may be washed with clear water and a soft brush, with a detergent, if necessary.
Dangerous product, follow safety instructions